Tomcat i7230A S5160 

                                                                  Chapter 3: BIOS Setup 

3.3.1 Advanced Chipset Control 

This section allows you to fine tune the chipset configuration. 

ECC Condition 

This feature is used to select ECC Error condition to be detected. 

Multiple bit / None / Single bit / Both 

ECC Error Handler 

When an ECC error occurs, it generates an interrupt. This feature is used to select the type of 

interrupt to report. 

SMI / NMI / SCI 

Parallel ATA 

This feature is used to enable the PATA function. 

Enabled / Disabled 

Serial ATA 

This feature is used to enable the SATA function. 

Enabled / Disabled 

Native Mode Operation 

This feature is used to choose Native Mode for ATA. However, certain OS is not supported 

under Native Mode. 

Auto / Serial ATA 

SATA Controller Mode Option 

This feature is used to select SATA controller mode. In  compatible mode , SATA and PATA 

drives are auto detected and placed in Legacy mode. In  Enhanced (non AHCI) mode , SATA 

and PATA drives are auto detected and placed in Native IDE mode. 

Compatible / Enhanced (non AHCI) 

32

http://www.tyan.com