Reference [Projects]

  REMAIN (h/m units) 

The screen for selecting the copy destination project appears 

The approximate recordable time remaining for each track is 

on the display. 

shown in hours (h)/minutes (m)/seconds. 

PRJ COPY

PRJ COPY

REMAIN

REMAIN

COPY TO

COPY TO

   14

45h55m46

45h55m46

Copy destination project number

  PRJ SIZ (MB units) 

3.

Turn the dial to select the copy destination project 

This shows the size of the currently loaded project in MB 

number, and press the [ENTER] key. 

(megabyte) units. 

The indication  SURE?  appears on the display. 

PRJ SIZE

PRJ SIZE

4.

Press the [ENTER] key to copy the project, or press 

 00122MB

 00122MB

the [EXIT] key to cancel. 

When copying is completed, the unit returns to the main 

  PRJ SIZ (h/m units) 

screen. 

This shows the size of the currently loaded project in terms 

of the recorded time per track, in hours (h)/minutes (m)/

seconds. 

Erasing a project 

This operation erases the specified project from the hard 

PRJ SIZE

PRJ SIZE

disk. 

00h24m13

00h24m13

1.

Refer to steps 1   2 of  Basic procedure  to bring 

H

INT

up the indication  PROJECT ERASE  on the 

  These screens are for display only, and contain no items 

that can be edited. 

display. Then press the [ENTER] key. 

  The remaining recordable time is an approximation. 

The project to erase is shown on the display. 

PRJ ERS

PRJ ERS

Duplicating a project 

PRJ011

PRJ011

   11

This operation copies a specified project that is saved on the 

Project name       Project number

hard disk. 

2.

Turn the dial to select the project to be erased. 

1.

Refer to steps 1   2 of  Basic procedure  to bring 

up the indication  PROJECT COPY  on the display. 

3.

Press the [ENTER] key to erase the project, or 

Then press the [ENTER] key. 

press the [EXIT] key to cancel. 

The name and number of the project to copy are shown on 

To return to main screan after erasing is completed, press the 

the display. 

[EXIT]key.

PRJ COPY

PRJ COPY

N

OTE

PRJ012

PRJ012

   12

  Once a project has been erased, it cannot be recovered. 

Use this operation with care. 

Project name       Project number

  This item cannot be selected for projects with the protect 

ON setting. 

2.

Turn the dial to select the copy source project, and 

press the [ENTER] key. 

ZOOM MRS 802

126