Reference [Projects]

3.

Press the [ENTER] key to execute the operation (or 

change the setting) that you selected. 

Project number

For details on the procedure, refer to the sections that follow. 

PRJNo007

PRJNo007

4.

PRJ007

PRJ007

To return to the main screen, press the [EXIT] key 

several times. 

Project name

The lowest free project number is automatically selected, 

Loading a project 

and a default name of  PRJxxx  (where xxx is a project 

number in the range of 000   999) will be assigned. 

You can select a project that was saved on the hard disk, and 

load it. 

2.

If necessary, edit the project name. 

1.

To edit the name, use the cursor left/right keys to move the 

Refer to steps 1   2 of  Basic procedure  to bring 

flashing position to the character you want to change, and 

up the indication  PROJECT SELECT  on the 

turn the dial to select a character. The project name can also 

display. Then press the [ENTER] key. 

be edited later (

 p. 127). 

The project to load is shown on the display. 

3.

Press the [ENTER] key to create the project, or 

press the [EXIT] key to cancel. 

PRJ SEL

PRJ SEL

PRJ001

PRJ001

    1

When the new project has been loaded, the unit returns to 

the main screen. 

Project name       Project number

2.

Turn the dial to select the desired project. 

Checking the project size/available 

hard disk capacity 

3.

Press the [ENTER] key to load the project, or press 

the [EXIT] key to cancel. 

This displays the size of the currently loaded project, the 

When loading is completed, the unit returns to the main 

available capacity of the internal hard disk, and the 

screen. 

remaining recording time. 

1.

Refer to steps 1   2 of  Basic procedure  to bring 

H

INT

  When you press the [ENTER] key, the current project will 

up the indication  PROJECT SIZE  on the display. 

be automatically saved on the hard disk before the new 

Then press the [ENTER] key. 

project is loaded. 

  When power to the MRS 802 is turned on, the project that 

2.

Use the cursor up/down keys to select the desired 

you were last working on will be loaded automatically. 

screen from one the following options. 

Creating a new project 

  REMAIN (MB units) 

This shows the remaining space on the internal hard disk in 

This operation creates a new project. 

MB (megabyte) units. 

1.

Refer to steps 1   2 of  Basic procedure  to bring 

REMAIN

REMAIN

up the indication  PROJECT NEW  on the display. 

013908MB

013908MB

Then press the [ENTER] key. 

The project to create is shown on the display. 

ZOOM MRS 802

125