Reference [Creating a CD]

7.

Turn the dial to select the project to load, and press 

the [ENTER] key. 

The indication  LOAD SURE?  appears on the display. 

8.

To execute the load operation, press the [ENTER] 

key. To cancel, press the [EXIT] key instead. 

When you press the [ENTER] key, the project data are read 

from the disc and loaded to the hard disk. When the 

operation is finished, the display indication changes to 

 LOAD COMPLETE . 

If the backup spans multiple discs, the disc will be 

automatically ejected when the data have been loaded, and 

the following message appears on the display. 

CHANGE

CHANGE

DISC002

DISC002

9.

When the above message appears, insert the next 

CD R/RW disc, and press the [ENTER] key. 

The load operation resumes. If more than two discs are 

required, the above steps will be repeated. When the load 

operation is finished, the display indication changes to 

 LOAD COMPLETE . 

N

OTE

If the backup of the project spans multiple discs, be sure to 

insert the discs in the correct order. Otherwise the project 

data will not be read correctly. 

H

INT

When the disc has been ejected, it is also possible to abort 

the load operation. To do this, press the [EXIT] key while the 

indication  CHANGE DISCxxx  (where xxx is the disc 

number) is shown. The indication will change to  LOAD 

CANCEL? . Press the [ENTER] key to terminate the process. 

10.

To return to the main screen, press the [EXIT] key 

several times. 

ZOOM MRS 802

123