Reference [Creating a CD]

Erasing a CD RW Disc 

6.

Press the [ENTER] key. 

The display now shows the indication  CdrwErs SURE? . 

The entire information on a CD RW disc (audio data or 

backup data) can be erased, thereby returning the disc to the 

7.

To carry out the erase process, press the [ENTER] 

blank state. 

key once more. 

The erase process starts. During the operation, the display 

1.

Insert the disc to erase into the CD R/RW drive. 

shows  CdrwErs wait... . 

When the erasing process is finished, the display indication 

2.

From the main screen, press the [CD R/RW] key in 

changes to  CdrwErs COMPLETE . 

the display section. 

The CD R/RW menu appears. 

8.

To return to the main screen, press the [EXIT] key 

several times. 

3.

Verify that the indication  CD R/RW AUDIO CD  is 

shown on the display, and press the [ENTER] key. 

H

INT

The audio CD menu appears. 

Erasing a CD RW disc is also possible from the backup 

menu (   p. 119). After you bring up  BACKUP CDRW ERS  

on the display and press the [ENTER] key, the disc can be 

erased in the same way as described above. 

AUDIO CD

AUDIO CD

BURN CD

BURN CD

4.

Use the cursor left/right keys to bring up the 

indication  AUDIO CD CDRW ERS  on the display, 

and press the [ENTER] key. 

The display shows  CdrwErs NORMAL . 

CdrwErs

CdrwErs

NORMAL

NORMAL

5.

Use the cursor up/down keys to select one of the 

following two CD RW erase methods. 

  NORMAL (Default setting) 

Information from all areas of the disc is erased. This takes 

longer than the QUICK erase operation, but all contents of 

the disc are reliably erased. This method is recommended. 

(Required time is max. 74 minutes for a 650 MB disc and 80 

minutes for a 700 MB disc.) 

  QUICK 

Only the track information on the CD RW disc is erased. 

This requires less time than the NORMAL erase operation. 

ZOOM MRS 802

117