Reference [Creating a CD]

(3) Finalize status 

STOP [P] key 

When a  *  symbol is shown here, a non finalized CD R/

Playback stops, and the system returns to the beginning of 

RW disc has been inserted. 

the current track. 

(4) Current position in track 

FF [Y] key 

The location in the current track is shown here in hours (H), 

Playback stops, and the system jumps to the beginning of 

minutes (M), and seconds (S). 

the next track. 

5.

Use the FF [Y] and REW [T] keys to select the 

REW [T] key 

track to be played. 

Playback stops, and the system jumps to the beginning of 

While the track number is shown, the FF [

Y

] and REW 

the current track. 

[

T

] keys can be used to select the track on the CD. The FF 

[

Y

] key selects the next track and the REW [

T

] key selects 

9.

To return to the main screen, press the [EXIT] key 

the previous track. 

several times. 

6.

Use the cursor up/down keys to select the 

playback method for the audio CD. 

Each push of the cursor up/down keys toggles between the 

following two methods. 

  D (Digital playback) 

The digital audio signal of the CD is read by the MRS 802 

in the digital domain and becomes available as an audio 

signal at the rear panel MASTER OUTPUT jacks, and front 

panel MASTER PHONES jack. (Default setting) 

  A (Analog playback) 

The audio signal of the CD is reproduced via the headphone 

output of the CD R/RW drive. 

7.

To start playback of the audio CD, press the PLAY 

[R] key. 

Playback of the selected track starts. When the track is 

finished, playback continues with the next track. During 

audio CD playback, all faders except for the [MASTER] 

fader as well as the EQ, reverb, chorus/delay, and pan 

settings are disabled. 

8.

For track selection and for controlling playback 

stop/pause, use the transport section keys. 

PLAY [R] key 

Playback of the selected track starts. Pressing the key during 

playback sets the system to pause mode. 

ZOOM MRS 802

116