Reference [Creating a CD]

11.

When writing is complete, press the [EXIT] key. 

Recording audio data by album 

The unit returns to the condition of step 4. To add more 

audio data, load the next project and repeat the above 

This method involves creating a list for the audio CD (called 

procedure. 

an  album ) which contains information about master tracks 

from multiple projects saved on the hard disk. The CD R/

H

CD RW disc containing these master tracks is then written 

INT

  When using this method, a blank gap of 2 seconds will 

in a single operation. 

automatically be inserted between tracks on the disc. 

  As long as the finalizing operation has not been performed, 

N

OTE

the CD R/RW disc cannot be played on an ordinary CD 

Before starting the procedure described below, use the 

player. (For information on how to audition an unfinalized 

trimming function on the master track to make sure that it 

CD R/RW disc, refer to page 115.) 

does not include unwanted blank portions at the beginning 

and end. 

12.

To return to the main screen, press the [EXIT] key 

several times. 

1.

Insert a CD R/RW disc into the CD R/RW drive. 

To newly write audio data, use a blank CD R/RW disc or a 

CD RW disc that has been completely erased. 

To add audio data, use a CD R/RW disc that has not yet been 

finalized. 

2.

Verify that the correct V takes are selected for the 

master tracks of the projects to be recorded. 

N

OTE

Projects in which an unrecorded V take is selected for the 

master track cannot be used as source material. 

3.

From the main screen, press the [CD R/RW] key in 

the display section. 

The CD R/RW menu appears. 

4.

Verify that the indication  CD R/RW AUDIO CD  is 

shown on the display, and press the [ENTER] key. 

The audio CD menu appears. 

AUDIO CD

AUDIO CD

BURN CD

BURN CD

5.

Use the cursor left/right keys to bring up the 

indication  AUDIO CD ALBUM  on the display, and 

press the [ENTER] key. 

In this condition, you can register projects for the album. 

The indication  END OF PROJ  denotes the end of the 

album list of projects. When the album display is first called 

up, no project has been registered, therefore the indication 

 END OF PROJ  appears. 

ZOOM MRS 802

113