Reference [Effects]

2.

Use the PATCH SELECT [Q]/[W] keys or the dial to 

4.

If you want to change the effect type, turn the dial. 

select the new patch. 

When the effect type is changed, the effect parameters will 

As you turn the dial, new patches will be recalled 

also change accordingly. 

immediately. If the track mixer REVERB SEND and 

CHORUS/DELAY SEND parameter settings are raised, you 

TYPE 

TYPE 

can press the PLAY [

R

] key to play back the song, and 

DELAY

DELAY

listen to the result of the newly selected patch. 

H

H

INT

INT

  For details on track mixer operations, refer to p. 71. 

If the contents of a patch have been edited, the  EDIT  

indicator in the upper part of the display will change to 

  The lit/out status of the [REVERB] or [CHORUS/DELAY] 

 EDITED . 

key shows the on/off status of that module. Each push of 

the key toggles the status. 

5.

Use the cursor up/down keys to select the effect 

3.

parameter that you want to edit. 

To return to the main screen, press the [EXIT] key. 

The first line of the display shows the effect type, and the 

second line the effect parameter name. 

Editing a send/return effect patch 

The current setting is shown to the right of the parameter 

name. 

This section explains how to edit a send/return effect patch. 

1.

DELAY 

DELAY 

Press the [REVERB] key or [CHORUS/DELAY] key 

TIME

TIME

  370

in the effect section. 

Effect parameter 

Setting value 

2.

If necessary, turn the dial to select the patch that 

6.

you want to edit. The following screen is an 

Turn the dial to change the setting. 

example of the display indication when the 

For details on the effect types that can be selected for reverb 

[CHORUS/DELAY] key was pressed. 

or chorus/delay, and on the range of each effect parameter, 

refer to the appendix (

 p. 145   153) at the end of this 

manual. 

SEND CHO

SEND CHO

DeepCho

DeepCho

    7

7.

Repeat steps 5   6 as necessary to edit other effect 

parameters. 

3.

Press the [EDIT] key. 

The display will indicate  EDIT , and a screen will appear 

8.

When you have finished editing, press the [EXIT] 

in which you can edit the patch. When the [EDIT] key is 

key. 

pressed, the effect type selected for that send/return effect is 

The unit returns to the patch select screen. 

shown. 

N

OTE

Keep in mind that if you select another patch without first 

TYPE 

TYPE 

storing the patch, the edited contents will be lost. If you want 

CHORUS

CHORUS

to keep the results of your editing session, refer to the 

Effect type 

following section. 

ZOOM MRS 802

108