Reference [Effects]

7.

To confirm the new name, press the [STORE] key in 

Applying the insert effect only to 

the control section twice. 

the monitor signal 

The new name is stored, and the unit returns to the patch 

selection screen. 

Normally when the insert effect is placed into the input 

mixer, the signal processed by the effect will be recorded on 

N

OTE

the track. If necessary, however, you can apply the insert 

Keep in mind that the name will revert to the previous setting 

effect only to the monitor signal, and record the unprocessed 

if you switch to another patch without storing the edited 

input signal on the track. For example when recording the 

patch name. 

unprocessed sound of a vocal performance, the vocalist may 

be more comfortable singing if an insert effect suitable for 

mic recording is applied to the monitor signal. 

INPUT

Insert effect

Recorder 

1.

Set the insert effect point to the input mixer. 

2.

Press the [UTILITY] key in the display section. 

The utility menu appears. 

UTILITY

UTILITY

TR EDIT

TR EDIT

3.

Use the cursor left/right keys to call up the 

indication  UTILITY REC SRC , and press the 

[ENTER] key. 

The display changes as follows. 

In this condition, you can select one of the following two 

signal types to be recorded on the track. 

REC SRC

REC SRC

WET

WET

  WET 

The input signal that has passed through the insert effect will 

be recorded on the track (default setting). 

  DRY 

Only the unprocessed input signal will be recorded on the 

track. Even in this case, however, the insert effect will be 

applied to the monitor signal. 

ZOOM MRS 802

106