Reference [Effects]

9.

If you want to adjust the patch level (the final 

The patch will be stored, and the unit returns to the patch 

volume of the patch), use the cursor up/down keys 

select screen. 

to bring up the indication  TOTAL PAT LVL , and 

turn the dial. 

H

INT

The patch level can be adjusted in a range of 1   30. 

  Patches that you have stored are saved on the hard disk 

as part of the project. 

  Patch data included in an already existing project can be 

TOTAL

TOTAL

loaded into the current project (

 p. 110). 

PAT LVL

PAT LVL

   23

10.

When you have finished editing, press the [EXIT] 

Editing the name of an insert effect 

key. 

patch 

The unit returns to the patch select screen. 

This section explains how to edit the name of the currently 

selected patch. 

N

OTE

Keep in mind that if you return to the patch select screen and 

1.

Press the [INSERT EFFECT] keys which includes 

select another patch without first storing the patch, the 

the target patch. Then use the PATCH SELECT 

edited contents will be lost. If you want to keep the results of 

your editing session, refer to the following section. 

[Q]/[W] keys or the dial to select the patch that 

you want to edit. 

Storing an insert effect patch 

2.

Press the [EDIT] key. 

The currently selected patch can now be edited. 

A patch that you have edited can be stored in any location of 

the same algorithm. You can also store an existing patch in 

3.

Use the cursor left/right keys to bring up the 

another location to create a copy of that patch. 

indication  TOTAL PAT LVL . 

1.

Press the [INSERT EFFECT] keys in the display 

section, and then press the [EDIT] key. 

TOTAL

TOTAL

The currently selected patch can now be edited. Perform any 

PAT LVL

PAT LVL

   24

editing steps that you wish to make. 

4.

2.

Repeatedly press the cursor down key to bring up 

When editing is complete, press the [STORE] key in 

the indication  PAT NAME . 

the control section. 

The name of the selected patch can now be edited. The 

A screen for specifying the store target location appears on 

character currently selected for editing flashes. 

the display. 

STORE

STORE

PAT NAME

PAT NAME

MRS Drv

MRS Drv

MRS Drv

MRS Drv

    1

Patch number 

5.

Use the cursor left/right keys to move the flashing 

3.

position to the character you want to change, and 

Turn the dial to select the store destination patch 

turn the dial to select a character. 

number. 

For information on available characters, refer to page 34. 

4.

To store the patch, press the [STORE] key once 

6.

Repeat step 5 as necessary to complete the new 

more. 

name. 

ZOOM MRS 802

105