Reference [Effects]

Algorithm

Module/Display

CLEAN

COMP

COMP

PRE/DRV

PRE/DRV

3BandEQ

3BandEQ

MOD/DLY

MOD/DLY

TOTAL

TOTAL

DIST

ACO/BASS SIM

BASS

COMP

PRE AMP/DRIVE

EQ

MODULATION/DELAY

ZNR, VOL PDL, PAT LVL

COMP/LIM

COMP/LIM

MIC PRE

MIC PRE

3BandEQ

3BandEQ

MOD/DLY

MOD/DLY

TOTAL

TOTAL

MIC

COMP/LIM

MICPRE+DE ESSER

EQ

MODULATION/DELAY

ZNR, VOL PDL, PAT LVL

COMP Lch

COMP Lch

MicPre L

MicPre L

EQ Lch

EQ Lch

DOUBLE L

DOUBLE L

TOTAL

TOTAL

DUAL MIC

COMP/LIM

MICPRE

EQ

DOUBLING

ZNR, VOL PDL, PAT LVL

COMP/LIM

COMP/LIM

ISOLATOR

ISOLATOR

3BandEQ

3BandEQ

MOD/DLY

MOD/DLY

TOTAL

TOTAL

LINE

COMP/LIM

ISOLATOR

EQ

MODULATION/DELAY

ZNR, VOL PDL, PAT LVL

CMP/LoFi

CMP/LoFi

NORMLZR

NORMLZR

3BandEQ

3BandEQ

DIM/RESO

DIM/RESO

TOTAL

TOTAL

MASTERING

3BAND COMP/

NORMALIZER

DIMENSION/

EQ

ZNR, VOL PDL, PAT LVL

Lo Fi

RESONANCE

N

OTE

The table above shows the condition when the effect module 

FLANGER  

FLANGER  

is On. When the effect module is Off, the second line of the 

DEPTH

DEPTH

    2

display shows   OFF  . 

Setting value 

4.

If you want to switch the effect type for the 

selected module, turn the dial to select the desired 

6.

Turn the dial to change the setting. 

effect type. 

For details on the effect types that can be selected for each 

effect module, and on the effect parameters of each type, 

refer to the appendix (

 p. 145   153) at the end of this 

MOD/DLY

MOD/DLY

manual. 

FLANGER

FLANGER

Effect type name

7.

To switch the module On/Off setting, bring the 

module onto the display and press the [ENTER] 

H

INT

key. 

  If the contents of a patch have been edited, the  EDIT  

When the effect module has been set to Off, the effect type 

indicator in the upper part of the display will change to 

name is shown as   OFF   on the display. If you press the 

 EDITED . 

[ENTER] key once more in this condition, the setting is 

  If  TOTAL  is shown on the display, you can use the cursor 

returned to On. 

up/down keys to select PAT LVL, ZNR, or VOL PDL. 

N

OTE

FLANGER  

FLANGER  

Some effect modules have only one effect type. For such 

 OFF 

 OFF 

modules, there will be no screen for selecting the effect type. 

5.

Use the cursor up/down keys to select the effect 

N

OTE

parameter that you want to edit. 

If  TOTAL  is shown on the first line of the display, you can 

adjust the ZNR/VOL PDL module setting and the patch level. 

When you use the cursor up/down keys, a setting screen for 

Switching the effect module On/Off is not possible in this 

the effect types and parameters for this module is shown. 

case. 

The following diagram shows an example of what appears 

on the display when you have selected the DEPTH 

8.

Repeat steps 3   7 to make the desired edits for 

parameter of the  FLANGER  effect. 

other modules. 

ZOOM MRS 802

104