Reference [Effects]

3.

When the insert point has been selected, press the 

[EXIT] key. 

Algorithm 

Patch number 

Algorithm 

Patch number 

CLEAN

0   24

MIC

0   49

The unit returns to the main screen. 

DIST

0   44

DUAL MIC

0   49

ACO/BASS SIM

0   14

LINE

0   49

BASS

0   14

MASTERING

0   29

H

INT

When the insert effect is applied to a point other than the 

input mixer, the [INPUT SOURCE] key will be lit at the main 

screen. 

Changing the insert location of the 

insert effect 

Selecting the patch for the insert 

When the project is in its initial state, the insert effect is 

effect 

applied to the input mixer. However, you may change the 

insert location as necessary. The procedure is as follows. 

This section explains how to select the patch for the insert 

effect. 

1.

From the main screen, press the [INPUT SOURCE] 

1.

key in the effect section. 

Press the [INSERT EFFECT] keys in the display 

section. 

The currently selected insert location appears on the display. 

IN SRC

IN SRC

IN

IN

Insert point of insert effect

The key lights up, and the display indicates the patch 

The following points are available. 

currently selected for this algorithm. 

To select a patch for the insert effect, start by selecting the 

  IN 

algorithm (effect module combination). When you press the 

[INSERT EFFECT] keys, the first line of the display shows 

Input mixer (default setting) 

 INSERT  and the second line shows the patch for the insert 

  DRUM 

effect in this algorithm. 

Drum kit output 

  TR1   TR8 

Effect type

Track 1   8 output 

  TR1/2, TR3/4, TR5/6, TR7/8 

INSERT

INSERT

Track 1/2, 3/4, 5/6, 7/8 output 

MRS Drv

MRS Drv

    1       

  MASTER 

Patch name           Patch number

Immediately before [MASTER] fader 

2.

H

INT

Use the dial to select the insert location. 

When the send/return effect was operated, the first line of the 

display shows  SEND REV  or  SEND CHO . 

H

INT

While the display of step 1 is shown, you can select the insert 

2.

Use the PATCH SELECT [Q]/[W] keys or turn the 

point by pressing the [INPUT 1]/[INPUT 2] keys and the 

dial to select the patch. 

status keys. To select the track pairs 1/2, 3/4, 5/6, and 7/8, 

The selected patch becomes active immediately. 

press two status keys simultaneously. 

ZOOM MRS 802

101