Reference [Rhythm]

5.

To enter a note, hit the status key corresponding to 

printed above the status keys 1   8.) When starting out with 

the note, and then press the PLAY [R] key. 

an empty rhythm pattern, selecting this bank is 

convenient. 

The note is recorded, and the unit advances by one step, 

corresponding to the quantize value set in step 4. 

  Depending on which drum kit is currently selected, the 

sound type assigned to status keys 1   8 may be different. 

Switch the drum kit if necessary (

P. 79). 

Q=4

Q=4

8.

Repeat steps 5   7 while changing the step length 

001  2  0

as necessary, to enter the desired rhythm pattern. 

When you reach the end of the pattern, the unit 

H

INT

If you hit several status keys during input, multiple sounds 

automatically returns to the first measure, letting you enter 

will be recorded at the same position. 

more instrument sounds. 

6.

To enter a rest, press only the PLAY [R] key. 

9.

To edit the recorded contents after step input, 

If you press the PLAY [

R

] key by itself, the position 

proceed as follows. 

advances by one step (duration of quantize value) but no 

play information is recorded. 

  To erase the performance of a specific drum sound 

When you advance the record position with the PLAY [

R

] 

key, the status key that is input at the current position lights 

Q=4

Q=4

up. By holding down the [DELETE/ERASE] key and 

pressing the lit key, you can erase the sound of that key. The 

001  3  0

key goes out, and the playing information is erased from the 

7.

rhythm pattern. 

To switch the drum sounds assigned to the status 

keys 1   8, press the [SOLO] key and then turn the 

N

OTE

dial to select the instrument bank number. 

  When searching for a note to erase, set the quantize value 

A combination of eight sounds assigned to the status keys is 

to the same value as the smallest value used during 

called an "instrument bank". For one drum kit, you can use 

recording, or to a smaller value. Otherwise the start of a 

up to three instrument banks. (For information on which 

note may be missed. 

sounds are assigned to the status keys in the various banks, 

  Make sure that the sound to be erased is part of the 

see page 161.) 

currently selected instrument bank. 

If you press the [SOLO] key while the [DRUM] key is lit, 

10.

When you have finished step input, press the STOP 

the number of the currently selected instrument bank is 

[P] key. 

shown.

The unit returns to the rhythm pattern screen. Press the 

PLAY [

R

] key to hear the pattern that you recorded. 

INSTRMNT

INSTRMNT

   BANK=

   BANK=

    2

11.

To terminate pattern recording and return to the 

Bank number 

main screen, press the [EXIT] key.  

When you turn the dial to change the instrument bank 

number, the drum sounds assigned to status keys 1   8 are 

switched. To return to the original screen, press the [EXIT] 

key. 

H

INT

  For most drum kits, instrument bank 1 contains the basic 

drum sound. (The sound name is indicated by the letter 

ZOOM MRS 802

92