Reference [Mixer]

4.

When you have finished adjusting the panning 

Basic operation of the track 

value, press the [EXIT] key. 

mixer 

The unit returns to the main screen. The function of the PAN 

parameter changes as follows, depending on the number of 

inputs that are currently turned on, and on the number of 

Adjusting the volume/pan/EQ 

recording tracks that are currently selected. 

For each channel, you can adjust the volume, panning 

  When no recording track is selected 

(stereo position between L/R channels), and EQ (equalizer). 

For the signal that is sent from the input mixer to the L/R 

channels of the MASTER OUTPUT jacks, the PAN 

1.

To adjust the volume of the audio track or the drum 

parameter will adjust the panning position (if the input is in 

track, operate the respective fader. 

mono) or the balance (if the input is in stereo). 

2.

To adjust the panning position of a track or the 

  When two mono tracks are selected as recording 

drum track, press the [TRACK PARAMETER] key in 

tracks 

the track parameter section and use the cursor up/

For the signal that is sent from the input mixer to the two 

down keys to bring the following indication onto 

tracks, the PAN parameter will adjust the panning position 

the display. 

(if the input is in mono) or the balance (if the input is in 

stereo). 

TR1

TR1

PAN

PAN

    0

  When one mono track is selected as recording track 

The PAN parameter will have no effect. 

3.

Press the status key for the audio track or the drum 

track, and turn the dial to edit the value of the PAN 

parameter. 

The PAN parameter can be adjusted in a range of L100 (far 

left)   0 (center)   R100 (far right). 

To adjust the pan of another track or the drum track, repeat 

steps 2   3. 

H

INT

  If the stereo link function (  p. 73) is activated for the 

selected target track (audio track or drum track), the PAN 

parameter adjusts the left/right channel balance. 

  In the parameter screen you can also use the cursor left/

right keys to select the audio track or the drum track and 

the cursor up/down keys to switch parameters. 

4.

To adjust EQ, use the cursor up/down keys to bring 

up the following screen and then use the dial to 

adjust the setting. 

  EQ HI G parameter 

TR1

TR1

EQ HI G

EQ HI G

    0

ZOOM MRS 802

71