Reference [Mixer]

The range and default values for the parameters are shown 

H

INT

To record the signal processed by the send/return effect on 

below. 

a track, you can use bounce recording while the respective 

[INPUT 1]/[INPUT 2] key is on (

 p. 39). 

  CHORUS/DELAY SEND: 0   100 (default: 0) 

1.

  REVERB SEND: 0   100 (default: 0) 

Press the [CHORUS/DELAY] key or [REVERB] key 

to select a patch for the send/return effect. 

H

INT

The display changes and shows the currently selected patch 

When the send level is shown on the display, pressing the 

of the selected effect (chorus/delay or reverb). 

[ENTER] key will turn the signal output to the send return 

effect off. Pressing the key once more will turn the signal on 

2.

Turn the dial to select the patch you want to use. 

again. 

You can also select a patch by using the PATCH SELECT 

6.

[

Q

]/[

W

] keys in the effect section. 

When you have finished making settings, press the 

When you have selected the patch, press the [EXIT] key to 

[EXIT] key. 

return to the main screen. 

The unit returns to the main screen. 

3.

Press the [TRACK PARAMETER] key in the track 

parameter section and use the cursor up/down 

Adjusting the pan/balance 

keys to bring the following indication onto the 

This section explains how to adjust the pan (stereo position) 

display. 

of the signal sent from the input mixer to the MASTER 

OUTPUT jacks and the recording tracks, or the balance (the 

  To adjust the chorus/delay send level 

volume balance between two channels). 

1.

Press the [TRACK PARAMETER] key in the track 

TR1

TR1

parameter section and use the cursor up/down 

CHO SEND 

CHO SEND 

    0

keys to bring the following indication onto the 

Parameter Setting 

value 

display.  

  To adjust the reverb send level 

TR1

TR1

PAN

PAN

    0

TR1

TR1

REV SEND

REV SEND

    0

2.

Press the [INPUT 1] or [INPUT 2] key in the input 

Parameter Setting 

value 

section. 

The input mixer (INPUT) is selected as target for panning 

4.

Press the [INPUT 1] or [INPUT 2] key in the input 

adjustment. 

section. 

The input mixer (INPUT) is selected as target for setting the 

INPUT

INPUT

send level. 

PAN 

PAN 

    0

INPUT

INPUT

3.

Turn the dial to edit the value of the PAN parameter. 

CHO SEND 

CHO SEND 

    0

The PAN parameter can be adjusted in a range of L100 (far 

left)   0 (center)   R100 (far right). 

5.

Turn the dial to select the effect depth. 

Higher values result in more effect depth (stronger effect). 

ZOOM MRS 802

70