Reference [Mixer]

Parameter 

Description 

Drum track  Track 1   8  Master track 

EQ HI G

High frequency range EQ boost/cut amount 

EQ HI F

High frequency range EQ boost/cut frequency  

EQ LO G

Low frequency range EQ boost/cut amount 

EQ LO F

Low frequency range EQ boost/cut frequency 

CHO SEND

Volume sent to chorus/delay (send/return effect) 

REV SEND

Volume sent to reverb (send/return effect) 

PAN

Left/right position (L/R channel balance) 

FADER

Volume of track or rhythm section 

ST LINK

Link parameters of odd/even numbered channels 

V TAKE

V take selected for track 

Basic operation of the input 

4.

If you will be recording the sound through the 

mixer 

insert effect, press the [INPUT SOURCE] key in the 

effect section and turn the dial to set the insert 

position for the effect to IN. 

Assigning input signals to tracks 

With the default settings of a project, the insert effect is 

inserted into the input mixer (IN), and a patch suitable for 

This section explains how to adjust the level of signals input 

guitar/bass recording is selected. 

from the INPUT 1/2 jacks and the GUITAR/BASS jack, and 

how to send them to a track in the recorder section. 

IN SRC

IN SRC

IN

IN

1.

Make sure that the instrument or mic that you want 

to record is connected to the INPUT 1/2 or the 

GUITAR/BASS jack. 

H

INT

If you want to record without sending the sound through the 

insert effect, press the [BYPASS/TUNER] key in the effect 

N

OTE

section to bypass the insert effect. 

When something is connected to both the INPUT 1 jack and 

the GUITAR/BASS jack, the signal at the GUITAR/BASS jack 

5.

Press the [EXIT] key to return to the main screen. 

has priority and the INPUT 1 signal is disabled. 

2.

6.

Press one of [INSERT EFFECT] keys in the effect 

Press the [INPUT 1] or [INPUT 2] key, so that the 

section to select the desired algorithm, and turn 

key to which the instrument or mic is connected 

the dial to select the patch to be used. 

lights up. 

The key lights up and the currently selected patch appears 

This shows that the input is selected. You can also select 

on the display. When patch selection is complete, press the 

both inputs by pressing the two keys simultaneously. 

[EXIT] key to return to the main screen. 

You can also select a patch by using the PATCH SELECT 

H

INT

[

Q

]/[

W

] keys in the effect section. 

If an input is already selected (key is lit) and you press the 

other key, the currently selected key goes out and the other 

key becomes active. 

INSERT

INSERT

MRS Drv

MRS Drv

    1

3.

While playing your instrument, turn the [INPUT] 

control for the input selected in step 2, to adjust 

7.

While playing your instrument, adjust the recording 

the input sensitivity. 

level by turning the [REC LEVEL] control. 

Make adjustments so that the [PEAK] indicator flickers 

slightly when you play your instrument at its loudest 

The [REC LEVEL] control adjusts the signal level before it 

volume. 

is sent to the recording track (i.e., after it has passed through 

ZOOM MRS 802

68