Reference [Phrase Looping]

7.

Turn the dial to select the desired phrase loop 

of the phrase. If one measure of the phrase is shorter than 

number, and press the [ENTER] key. 

one measure of the rhythm song, there will be a blank until 

Phrase loops can be created from 1   10. The name LOOP01 

the measure where playback switches to the next phrase. 

  LOOP10 is assigned to the respective loop. 

When you press the [ENTER] key, the display changes to 

1 1 

2 1

3 1

4 1

(measure   beat) 

the loop input screen. 

Phrase A 

Phrase B 

(MEAS x02) 

(MEAS x01) 

8.

Use the status keys and [SOLO] key in the fader 

section to input the formula for creating the loop. 

For information on the FAST entry procedure, refer to page 

  ADJUST BAR & LEN 

64. 

When you select this setting, the phrase length is adjusted so 

that the measures of the rhythm song and the phrase are 

matched. (Pitch will not change.)  

0+(1+2)x

0+(1+2)x

8

1 1 

2 1

3 1

4 1

(measure   beat) 

9.

When formula input is completed, press the 

Phrase A 

Phrase B 

(MEAS x02) 

(MEAS x01) 

[ENTER] key. 

The following screen appears on the display. This screen lets 

you select whether to match phrase playback to the rhythm 

N

OTE

section measure. 

  When selecting ADJUST BAR or ADJUST BAR & LEN, 

verify that the MEAS X parameter for each phrase is set to 

a suitable number of measures. If the setting is 

ADJUST

ADJUST

inappropriate, the rhythm song and phrase will not 

OFF

OFF

synchronize properly. 

  If the compression/stretch ratio exceeds a certain range, 

10.

Turn the dial to select one of the following 

the result will not be as intended. In this case, the 

indication  Out of range  appears during processing. 

methods. 

11.

Press the [ENTER] key. 

  ADJUST OFF 

The indication  CREATE SURE?  appears on the display. 

When you select this setting, the selected phrase is played 

continuously, independent of the rhythm song bar lines and 

12.

To carry out the phrase loop creation process, 

tempo. (This is the default setting.) 

press the [ENTER] key once more. 

The phrase loop is created. When the process is completed, 

1 1 

2 1

3 1

4 1

(measure   beat) 

the display reverts to the condition of step 2. 

Phrase A

Phrase B

  ADJUST BAR 

When you select this setting, phrase playback start is aligned 

to the measure start of the rhythm song. If one measure of 

the phrase (phrase playback range divided by number of 

measures specified by MEAS X parameter) is longer than 

one measure of the rhythm song, the phrase is switched 

when the number of measures specified by the MEAS X

(

P.61) parameter has played, without waiting for the end 

ZOOM MRS 802

66