Reference [Track Editing]

Track capture and swap 

Exchanging V takes 

You can capture the audio data of any track and temporarily 

You can exchange the audio data of two specified V takes. 

store them on the hard disk. Later you can swap the captured 

data with the current data of the track. This lets you for 

example save the state of a track before an editing operation. 

If the result of the operation is not as desired, you can then 

Exchange

easily restore the track to its previous state. 

1.

N Capture

Recorded data 

Refer to steps 1   5 of  Basic V take editing steps  

Recorder

to select the exchange source track/V take and to 

Track 1 

bring up the indication  EXCHG  on the display. 

Track 2 

Track 3 

Then press the [ENTER] key. 

A screen for selecting the exchange destination appears on 

Captured data

the display. 

 of track 1

Capture operation

 for track 1

EXCHG TO

EXCHG TO

N Swap

Recorded data 

TR 1  1

TR 1  1

Recorder

Track 1 

Track 2 

2.

Track 3 

Use the cursor left/right keys and the dial to select 

the exchange destination V take, and press the 

[ENTER] key. 

Captured data

 of track 1

Swap operation

The indication  EXCHG SURE?  appears on the display. 

 for track 1 

Recorder

3.

Track 1 

To execute the exchange operation, press the 

Track 2 

[ENTER] key once more. To cancel the operation, 

Track 3 

press the [EXIT] key. 

After the exchange operation is completed, the unit returns 

Captured data

 of track 1

to the V take editing menu. 

N

OTE

Captured track data will be erased from the hard disk when 

the currently selected project is saved. 

Capturing a track 

You can capture the audio data of any specified track. 

1.

From the main screen, press the [UTILITY] key in 

the display section. 

The indication  UTILITY TR EDIT  appears on the display. 

2.

Use the cursor left/right keys to bring up the 

indication  UTILITY CAP/SWAP  on the display, 

and press the [ENTER] key. 

ZOOM MRS 802

55