Reference [Recorder]

Reference [Recorder] 

Using V takes 

indication  NO DATA  is shown instead of the V take name. 

In the level meter display area, a lit dot indicates a recorded 

V take. If the dot is out, the V take is unrecorded. 

Each track 1   8 of the recorder contains ten virtual tracks, 

A flashing dot indicates the currently selected V take for 

called  V takes . For each track, you can select one take, 

each track. (The dot for the selected V take will flash at the 

which will be used for recording and playback. For example, 

same frequency regardless of whether it is recorded or not.) 

you can switch V takes as you record multiple vocal or 

guitar solos on the same track, and later compare them and 

select the best V take. 

V take currently selected 

for each track 1   8

V 

1

take 

Lit: recorded V take 

2

V takes

3

1

4

5

Flashing: currently selected V take 

2

6

3

7

4

8

Out: unrecorded V take 

5

9

10

6

7

Track

8

9

10

3.

Use the cursor left/right keys to select the track. 

1 2 3 4 5 6 7 8

Track

TR 3  1

TR 3  1

GTR 3  1

GTR 3  1

Switching V takes 

Here's how to switch the V take used by each track 1   8. 

H

INT

You can also select the track with the status keys (1   8, 

1.

From the main screen, press the [TRACK 

[MASTER]). 

PARAMETER] key in the track parameter section. 

4.

Turn the dial to select the V take. 

The key lights up and you can select various track 

parameters. 

5.

Repeat steps 3   4 as necessary, to select a V take 

2.

for each track. 

Use the cursor up/down keys to bring the 

indication  TR xx yy  onto the display (where xx is 

6.

the track number and yy the V take number). 

When you have finished selecting V takes, press 

the [EXIT] key. 

The V take name is shown under the track number/V take 

number. 

The [TRACK PARAMETER] key goes out, and the unit 

returns to the main screen. 

Track number

V take number

TR 1  1

TR 1  1

Editing V take names 

GTR 1  1

GTR 1  1

A V take that has been recorded will be automatically 

V take name

assigned a default name, according to the following pattern. 

H

INT

  GTRxx yy 

If you select a V take on which nothing is recorded, the 

V take recorded through insert effect CLEAN, DIST, or 

ZOOM MRS 802

33