Quick Tour

I Selecting the send/return effect patch 

I Adjusting the send/return effect intensity 

for each track 

1.

From the main screen, press the [REVERB] key or 

[CHORUS/DELAY] key in the effect section. 

5.

From the main screen, press the [TRACK 

Press the [REVERB] key to select a reverb patch, or the 

PARAMETER] key and use the status keys to select 

[CHORUS/DELAY] key to select a chorus/delay patch. The 

the track for which you want to make the setting. 

display will indicate the patch that is currently selected for 

the effect you selected. For example, a screen such as shown 

6.

Use the cursor up/down keys to bring up the 

below appears when the [REVERB] key is pressed. 

indication CHO SEND or REV SEND onto the 

second line of the display. 

Select CHO SEND if you want to adjust the chorus/delay 

SEND REV

SEND REV

VcxRev  

VcxRev  

    8

send level. Select REV SEND if you want to adjust the 

reverb send level. 

Patch name        Patch number

2.

Turn the dial to select a patch. 

TR2

TR2

REV SEND

REV SEND

    0

The send/return effect has 20 preprogrammed patches 

(numbered 0   19). If desired, you can edit these patches to 

7.

modify the effect further (

 p.108). 

While playing the song, turn the dial to adjust the 

send level value. 

SEND REV

SEND REV

SoftHall 

SoftHall 

TR2

TR2

    2

REV SEND

REV SEND

   48

3.

8.

Adjust the send level for other tracks in the same 

Select the patch for the other send/return effect in 

way. 

the same way. 

4.

9.

Adjust the intensity of the other send/return effect 

To return to the main screen, press the [EXIT] key 

in the same way. 

several times. 

10.

To return to the main screen, press the [EXIT] key 

N

OTE

several times. 

In the default condition, the send level for the send/return 

effect is set to 0 for each track. Therefore you need to raise 

the setting to verify the sound produced by the effect. 

ZOOM MRS 802

30