Quick Tour

Step 3: Overdubbing 

return to the beginning of the song. Then hold 

down the REC [O] key and press the PLAY [R] key. 

In this step, you will learn how to record another instrument 

Recording on track 2 will begin. Play your instrument while 

on a new track, while listening to the guitar part you already 

listening to the rhythm section and track 1. 

recorded. Recording additional parts in this way is called 

 overdubbing . 

4.

When you have finished recording, press the STOP 

[P] key. 

The indication  wait...  is briefly shown on the display, and 

3.1 Making settings for input 

then the main screen returns. 

sensitivity and insert effect 

N

OTE

1.

The duration of the  wait...  period may differ depending on 

Connect an instrument or microphone to the 

the recording cordition. Never turn power to the unit off while 

INPUT 1 jack. 

 wait...  is being shown on the display. Otherwise recorded 

data may be lost and damage to the unit may occur. 

2.

Press the [INPUT 1] key so that the key lights up. 

5.

To listen to the recorded content, press the ZERO 

3.

While playing the instrument, use the [INPUT] 

[U] key to return to the beginning of the song, and 

control 1 to adjust sensitivity. 

press the PLAY [R] key. 

The rhythm section and tracks 1/2 will be played back. 

4.

While playing the instrument, use the [REC LEVEL] 

Adjust the fader 1/2 and the [DRUM] fader as necessary. 

control to adjust the recording level. 

6.

To stop playback, press the STOP [P] key. 

5.

Select the algorithm and patch for the insert effect 

7.

Press status key 2 until the key is lit in green. 

as described for Step 2. 

Use the same procedure to record other tracks. 

6.

To return to the main screen, press the [EXIT] key 

several times. 

3.2 Selecting a track and recording 

Now you'll record the second instrument on track 2. 

1.

Repeatedly press the status key 2 until the key is lit 

in red. Verify that the status key 1 and the [DRUM] 

status key are lit in green. 

Track 2 is in the recording standby condition. 

2.

Set the [MASTER] fader to 0 dB and use fader 2 to 

adjust the monitor level. 

If necessary, set the recorder to playback and operate faders 

1/2 and the [DRUM] fader to adjust the monitor level 

balance between tracks. 

3.

To begin recording, press the ZERO [U] key to 

ZOOM MRS 802

27