Quick Tour

4.

When you have finished recording, press the STOP 

When a recording track has not been selected 

[P] key. 

MASTER

The REC [

O

] key and PLAY [

R

] key will go out, and 

Track 1

recording will stop. The indication  wait...  is briefly shown 

Track 2

on the display, and then the main screen returns. 

When a recording track (track 1) has been selected

N

OTE

1

MASTER

The duration of the  wait...  period may differ depending on 

Track 1

the recording cordition. Never turn power to the unit off while 

Track 2

 wait...  is being shown on the display. Otherwise recorded 

data may be lost and damage to the unit may occur. 

5.

To listen to the recorded content, press the ZERO 

H

INT

[U] key to return to the beginning of the song, and 

You can select up to two tracks simultaneously for recording. 

press the PLAY [R] key. 

(Allowable track pairs are 1/2, 3/4, 5/6, and 7/8.) 

The track will be played back together with the rhythm 

2.

Set fader 1 and the [MASTER] fader to 0 dB. Then 

section. 

adjust the volume of the monitor system while 

playing your instrument. 

H

INT

The REW [T] key and FF [Y] key only operate when the 

3.

recorder is in the stop mode. 

To begin recording, press the ZERO [U] key to 

return to the beginning of the song. Then hold 

6.

To stop playback, press the STOP [P] key. If you 

down the REC [O] key and press the PLAY [R] key. 

want to re do the recording, repeat steps 3 and 4. 

The REC [

O

] key and PLAY [

R

] key will light, and 

recording will begin. Record your instrument playing while 

7.

Press status key 1 until the key is lit in green. 

listening to the rhythm section. 

The recording standby condition of track 1 is canceled. 

H

INT

  Recorded content can be copied, deleted, or edited as an 

entire track or by specifying a range (

 p. 46). 

  By using switching the V take for the track, you can record 

The recording level can be checked with the IN1/IN2 level 

a new take while preserving the current take (

 p. 33). 

meter in the lower left of the display and the [CLIP] 

indicator of the [REC LEVEL] control. 

Basic operation of transport keys  

REW [T] key 

FF [Y] key 

Moves the current position back in 1 second steps. 

Moves the current position forward in 1 second 

Movement speed can be increased by holding down the 

steps. Movement speed can be increased by 

REW [

T

] key and pressing the FF [

Y

] key. 

holding down the FF [

Y

] key and pressing the 

REW [

T

] key. 

ZERO [U] key

Returns the recorder to the start 

position (counter zero position). 

REC [O] key 

When this key is held down while pressing the 

PLAY [

R

] key, the recorder starts to record. 

Pressing this key during playback causes punch 

in, and pressing the key during recording causes 

STOP [P] key 

PLAY [R] key 

punch out. 

Stops the recorder. 

Starts playback from the current position. 

ZOOM MRS 802

26