Listening to the Demo Songs

Listening to the Demo Songs

When shipped from the factory, the internal hard disk of the MRS 802 contains two demo songs. To listen to these, proceed as 

follows. 

Demo song protect status 

Selecting the demo song 

The demo songs on the hard disk are set to protected status, 

On the MRS 802, song data are managed in units called 

which means that level mixing and other settings can be 

"projects". A project encompasses recorded audio data, 

changed while you play the song, but the changes cannot be 

rhythm patterns and rhythm songs of the rhythm section, 

stored on the disk. If you wish to retain changes you have 

internal effect patches (effect programs), and other 

made, disable the protect status (

 p. 127). 

information. When you load a project, the complete state in 

which that song was saved will be reproduced. 

To load the demo song project from the hard disk, proceed 

Turning on the power 

as follows. 

1.

1.

Press the [PROJECT] key. 

Make sure that the AC adapter, instrument, and 

The indication "PROJECT SELECT" appears on the 

audio system (or headphones) are correctly 

display. This is the screen for selecting a project. 

connected to the MRS 802. (For information on 

connections, refer to page 15.) 

2.

Press the [ENTER] key. 

2.

Projects stored on the hard disk are shown in the lower part 

Press the [POWER] switch on the rear panel. 

of the display. 

Power to the MRS 802 comes on, the unit performs a self 

test, and switch settings are read. Wait until the following 

indication appears on the display. This screen is called the 

PRJ SEL

PRJ SEL

SLAVE

SLAVE

main screen. 

    0

Project name  Project number 

PRJ 000

PRJ 000

SLAVE

SLAVE

3.

Turn the dial to select the demo song. 

0 0 0  0 001  1  0

Projects number 0 and 1 are demo songs. 

3.

Turn on the audio system connected to the 

4.

Press the [ENTER] key. 

MASTER OUTPUT jacks. 

The selected project is loaded. While the hard disk is being 

accessed, the [HDD] indicator lights up and the indication 

H

"LOADING" appears on the display. When the display 

INT

When a synthesizer or other electronic instrument is 

changes, the demo song has been loaded. 

connected to the MRS 802, turn power on in the order 

synthesizer 

 MRS 802 

 audio system. Turn power off in 

the reverse order. 

ZOOM MRS 802

19