Connections

Connections 

Connect your instruments, audio devices, and MIDI devices as shown in the following diagram. 

GUITAR or BASS 

Only one of these jacks can be used 

at a time. If instruments/microphones 

are connected to both jacks, the 

GUITAR/BASS jack has priority. 

MIDI interface

To  supply +48V phantom power to a 

condenser mic, set the [PHANTOM] 

MIDI

MIDI 

switch on the rear panel to ON. 

MIDI sequencer 

IN

OUT

(Phantom power will be supplied to 

(e.g., computer)

both INPUT 1/2 connectors.) 

Dynamic microphone or 

condenser microphone

 Rear panel 

AC adaptor

Audio system (audio components 

or amplified speakers)

To  prevent damage to the speakers of your 

audio system, turn off the power of the system 

(or turn the volume all the way down) before 

you make connections. 

R

L

Loop the cable of the AC adaptor around 

the hook as shown in the diagram before 

Synthesizer or sampler, etc.

connecting it to the DC 12V jack. This 

will prevent the plug from being 

When connecting stereo output devices such as 

disconnected if the AC adaptor cable is 

a synthesizer or CD player, connect the L 

accidentally pulled. 

output of the external device to the INPUT 1  

jack, and the R output to the INPUT 2 jack. 

ZOOM MRS 802

15