*

2

  You must input two digits for the month and day. This

means you should include a leading zero for values

from 1 through 9 (01, 02, 03... etc.).

  You can specify either month, day, year (MDY) or day,

month, year (DMY) as the date input format. See the

 Date Input  setting under  Configuring Settings  (page

E 16).

Note

  After specifying the 1 Days in Year (Date Mode) in the

Day Calculation Mode, you can calculate any one of the

following three values by inputting values for the other

two: 2 Starting Date (d1), 3 Ending Date (d2), and 4

Number of Days (Dys).

A Basic DAYS Mode Procedure

Example 1: To calculate the number of days between two

dates

1. Input the required values from the Setting Values table

(page E 64).

  For this example, use

fc to select 1  Set: ,

and then press E.

  Press 2 to select  365 .

  Use fc to select 2

 d1 , input 11052004, and

then press E.

  Use fc to select 3  d2 , input 04272005, and then

press E.

2. Select the value you want to calculate.

  For this example, use

fc to select  Dys .

3. Press l to perform the

calculation.

E 65