A Displaying the Setup Screen

There are two different ways to display the setup screen.

  Pressing the s key

  Selecting the  Set:  item on

the menu screen that

appears when you enter

some modes.

The following are the

procedures you need to

perform to access and use the

setup screen using the above

operations.

FC 200V

Important!

All of the example procedures presented in this manual

use the s key procedure to display the setup screen.

To display the setup screen with the s key

1. Press the s key.

This displays a menu of setup items.

  See  Setup Screen Settings  on page E 15 for a

complete list of menu items.

2. Use fc to select the setup item whose setting you

want to change, and then press E.

This displays a screen for configuring the setting of the

setup item you selected.

3. Configure the setting you want.

  You can select a setting by with the cursor and then

press  E , or you can input the number that

corresponds to the setting you want to select.

  See  Configuring Settings  on page E 16 for

information about configuring each setting.

To display the setup screen by selecting  Set:  on a

mode menu

Important!

The following procedure is possible only when there is a

 Set:  item on the menu that initially appears when you

enter a mode. It is not available in all modes.

E 14