Chapter 8      Command Reference

Privilege Level 15 Commands

Syntax Description

This command has no arguments or keywords.

Example

This command shows the nearest neighbor on the network.

show cdp neighbor

cdp neighbor device: Switch

        device type: cisco WS C2924 XL

        port: FastEthernet0/12

        address: 209.165.201.0

show cdp run

To display the Cisco Discovery Protocal (CDP) configuration, use the show 

cdp run command:

show cdp run

Syntax Description

This command has no arguments or keywords.

Example

This command displays the CDP configuration:

show cdp run

CDP protocol is enabled ...

        broadcasting interval is every 60 seconds.

        time to live of cdp packets is 180 seconds.

        CDP is enabled on port eth0.

show config

To display the system configuration, use the show config command:

show config

Syntax Description

This command has no arguments or keywords.

User Guide for the CiscoWorks Hosting Solution Engine 1.8.1

OL 6319 01

8 47