Chapter 8      Command Reference

Privilege Level 15 Commands

A default domain name allows the system to resolve any unqualified host names. 

Any IP hostname that does not contain a domain name will have the configured 

NS server, this appended name is resolved by the DNS server, and then added to 

the host table.

Example

This command defines the default domain name cisco.com:

ip domain name cisco.com

This command removes the default domain name:

no ip domain name

Related Command

ip name server, page 8 28

ip name server

To specify the address of up to three name servers for name and address 

resolution, use the ip name server command. To disable a name server, use the 

no form of the command:

ip name server ip address

no ip name server ip address

Syntax Description

ip address

Name server IP address (maximum of 3).

Usage Guidelines

Use the ip name server command to point the system to a specific DNS server. 

You may configure up to three servers.

If you attempt to configure a fourth name server, the following error message 

appears:

# Name server table is full.

User Guide for the CiscoWorks Hosting Solution Engine 1.8.1

8 28

OL 6319 01