Chapter 8      Command Reference

Privilege Level 15 Commands

Usage Guidelines

Use this command to erase the configuration in Flash memory and reload the 

device.

When you enter the command, you are prompted for confirmation. Enter yes to 

confirm, or press Enter to accept the default response no.

Caution

When you confirm this command, the system configuration is erased and the 

system reboots automatically. The system will not operate until you reconfigure 

it.

When the system reboots, you must reconfigure it with the setup program. For 

information about using the setup program, refer to  Installation and Setup Guide 

for the Cisco 1105 Hosting Solution Engine. 

Note

When the system erases the configuration, it is disconnected from the network 

because the network interface configuration is erased. To continue working on the 

system you must use the system console.

Example

This command erases the system configuration:

erase config

This will erase your configuration, return device t

o factory defaults, and reload the device 

Do you want to continue?[no]:yes

firewall

To implement port filtering on the Hosting Solution Engine, use the firewall 

command:

firewall port [public | private] | [icmp telnet ssh snmp https 1741]

Syntax Description

eth <0 5>

Port to be configured. Acceptable values are eth0 5. 

public

Denies access via ICMP, Telnet, SNMP, and the HTTP 1741 

port. 

User Guide for the CiscoWorks Hosting Solution Engine 1.8.1

OL 6319 01

8 19