Chapter 8      Command Reference

Privilege Level 15 Commands

telnet

Controls the telnet timeouts.

waitdelay default

Sets the telnet wait delay to 1000 milliseconds, the default.

waitdelay status

Displays the current telnet wait delay.

waitdelay time

Sets the telnet wait delay, in milliseconds.

timeout default

Sets the telnet timeout to 20000 milliseconds, the default.

timout status

Displays the current telnet timeout.

timeout time

Sets the telnet timeout, in milliseconds.

provtimeout default Sets the provision task timeout to 180000 milliseconds, the 

default.

provtimeout status

Displays the current provision task timeout.

provtimeout time

Sets the telnet timeout, in milliseconds.

logintimeout default Sets the provision task timeout to 120000 milliseconds, the 

default.

logintimeout status

Displays the current login timeout.

logintimeout time

Sets the login timeout, in milliseconds.

Note

Errors can occur if HSEANIServer is not running or is not ready to receive an 

update request. To make sure that the HSEANIServer update works, retry the 

command.

Example

The following command sets the provision task timeout to 120000 milliseconds, 

the default.

discoverycntrl telnet logintimeout default

dumptcp

Use the dumptcp command to display TCP/IP network protocol packet content. 

dumptcp proto { snmp snmp trap ip icmp tcp udp | port port } 

[ interface eth[ernet] 0 ... 5] [ host host [ host2 host2 ]]

User Guide for the CiscoWorks Hosting Solution Engine 1.8.1

OL 6319 01

8 17