Chapter 4      Managing Devices

Device Management

Setting Up Secure Socket Layer (SSL) Services Modules

For SSL services modules for the Cisco Catalyst 6000 Series, configure the 

following:

Tasks

Procedure

1. Enable Telnet.

Telnet access must be enabled from the SSL module. 

2. Enable Telnet 

We recommend setting up two levels of password access. The following 

password privileges. 

example shows how to configure two passwords:

ssl proxy# config term

ssl proxy(config)# enable password mysecret

ssl proxy(config)# line vty 0 4

ssl proxy(config line)# login

ssl proxy(config line)# password secret

ssl proxy(config line)# privilege level 6

ssl proxy(config line)# end

ssl proxy#

See  Configuring the SSL Services Module  in the Catalyst 6500 Series SSL 

Services Module Installation and Configuration Note on Cisco.com for more 

details.

Setting Up LocalDirector

For LocalDirector devices, configure the following:

Task

Procedure

1. Upgrade your 

Visit the Software Center at Cisco.com for software downloads.

network device 

software to the 

supported versions.

2. Set up your network  To set up your device to accept ICMP ping requests from the Hosting 

device to accept ICMP  Solution Engine or the network upon which it resides, see your device 

ping requests.

documentation on Cisco.com for more details.

User Guide for the CiscoWorks Hosting Solution Engine 1.8.1

4 18

OL 6319 01