Chapter 4      Managing Devices

Device Management

When you add a Cat6K Native IOS device, enter the login credentials for the IP 

addresses that you entered as device seeds.

Step 7

For Hybrid Catalyst 6000 Series devices you will need to enter the MSFC 

community string and click Next. Then enter the MSFC login credentials and 

click Next. 

Step 8

If you are adding a Catalyst 6000 device, the Card Credentials window appears. 

Click any module from the pane on the left side of the window to set credentials. 

This step does not apply to SSL or CSM modules. Click Next.

Note

If you have not viewed or set the credentials for each module on the list, 

a confirmation message will appear, asking you to confirm that you have 

made all the changes you want.

Step 9

The Validate Credentials pane displays. Select the check box if you want HSE to 

validate device credentials. Click Next.

Step 10

The Add Devices Summary window appears. Click Finish.

If an error occurred, enter the information into the dialog boxes again. 

Note

The device will be added to the Device Manager table. To refresh the 

Device Manager table and view your changes, click Refresh.

Step 11

Discover devices. See 

Running Device Discovery, page 4 25

.

Related Topics

Adding Devices, page 4 5

Discovery: Overview, page 4 23

Adding a Generic Device

Procedure

Step 1

Select Devices >Device Management > Device Manager.

User Guide for the CiscoWorks Hosting Solution Engine 1.8.1

4 8

OL 6319 01